Industrial Chemicals

Solvent and petrochemicals are used in printing, thinner, cleaning, resine, pharmaceuticals, textiles, engineering industries we offer chemical acetone, toluene, benzene, methanol, xylene, cyclohexanone, m.e.k., mi-bk, butanol, butyl acetate, rubber process oil, extra. octanol hexane, carbon tetra chloride, perchloro ethylene, trichloro ethylene, pine oil, mto, extra.

Biocides are using in plasma tube, disinfectant and multi application

Ethyl Triphenyl Phosphonium Bromide



1. Ethyl Triphenyl Phosphonium Iodide


2. Butyl Triphenyl Phosphonium Bromide


3. Benzyl Tri phenyl Phosphonium Chloride


4. Methyl Triphenyl Phosphonium Bromide

Tetra Butyl Ammonium bromide

1. Tetra Butyl Ammonium Iodide


2. Tetra Butyl Ammonium Hydrogen Sulphate


3. Tetra Butyl Ammonium Fluoride Trihydrate


4. Tetra Butyl Ammonium Chloride (70 % Solution)


5. Tetra Ethyl Ammonium Bromide


6. Tetra Ethyl Ammonium Iodide

Soaps and detergents is come worlding using by common men, industries, textile, we supply following raw material sodium per carbonate, sls, sles, acid slurry, optical brightner, secondary alkane sulphonate sodium salt, acid thickener, enzymes, sodium sulphate, sodium carbonate, stpp, tspp, edta,

Offer chemicals for adhesives and gums gum paste, paper tape, are using following chemicals vam, bam, cyclohexanone, butyl acetate, ethyl acetate, caustic soda flake, pva, formal dehyde, borex, soda ash, sorbitol, bht etc.

We offer opticla brightner, liquid brightener, liquid softener, dye-fix, finishing chemicals, defoamer, caustic soda flakes, acetic acid, hydrogen peroxide, stain remover, disinfectant chemicals, water softner, descaling chemicals, sodium sulphate, dyes and pigment colour, binders, oxalic acid.

We offer chemicals for rubber industries resorcinol, zinc oxide, titanium dioxide, rubber process oil, wax, mould release oil, bht, synthetic rubber, neuprene rubber, silicone emulsion.

We offer oil solvent colour, food colour, rubber colour, reactive dyes, vat dyes, pigment colour, leather colours.

Bismuth TrichlorideCAS No. : 7787-60-2Molar Mass : 315.34Appearance : White to yellowish white deliq. crystals

Aluminum SubacetateCAS No. :142-03-0Molar Mass : 162.08Appearance : White powder

Lithium Acetate AnhydrousCAS No. : 546-89-4Molar Mass : 65.99Appearance : Fine white crystalline powder

Lithium BenzoateCAS No. : 553-54-8Molar Mass : 128.06Appearance : White powder

Bismuth Nitrate

CAS No. : 10035-06-0

Molar Mass : 485.02

Appearance : Hygroscopic crystals

Lithium Iodide Trihydrate

CAS No. : 10377-51-2

Molar Mass : 133.85

Appearance : White to light yellow crystalline powder

Methyl ethyl ketone Test Description Specification Limits Min. Max.Methyl ethyl Ketone 99.5 %(w/w) DIN 55687Water 0.05 %(w/w) ASTM D1364Total alcohols 0.5 %(w/w) ASTM D2804Colour 10ensity @20oC 0.804 0.806 gm/l ASTM D4052Refractive Index @20 oC 1.378 1.380 ASTM D1218Acidity as acetic acid 0.003 %(w/w) ASTM D1613Non Volatile matter 0.002 g/100 ml ASTM 1353 Pt-Co ASTM D1209Distillation

• IBP 79.0 oC
• DP 80.5 oC

Name:        3-Methoxy phenylacetonitrileSynonyms: Meta anisylcyanideCAS No.:  [19924-43-7]Structure:  End Use: Pharmacetical Intermediate

 

Dibutyl Maleate

 

 

Test Description Specification Limit Unit of Measure

 

 

MOLAR MASS 228.3

FREEZING POINT NMT -50 °C

WATER 500 max mg/kg

DENSITY, GM/CC, 20°C 0.993 - 0.995 °C

PLATINUM - COBALT- COLOR

N0

25 max

ACID VALUE, MG KOH/G 0.20 max MG KOH/G

MALEIC ACID, FUMARIC

DIBUTYL ESTER

98.5% max %

FUMARIC ACID DIBUTYL

ESTER

5.0% max %

SOLUBILITY IN WATER AT 20°C 0.35 g/l g/l

REFRACTIVE INDEX ND AT

20°C

1.445 - 1.446 °C

Specification Limits Min. Max.					Unit of Measure			Test Method
2 Ethyl Hexanol		99.5			%(w/w)			Gas Chromatography
Water		0.05			%(w/w)			DIN 51 777/ ASTM D 1364 (mod.Karl Fischer Method
Acid number calculated as acetic acid		0.10 0.01			Mg KOH/g %(w/w)			DIN EN ISO 3682/ ASTM D1613
Carbonyl number calculated as 2-Ethyl hexanal		0.15 0.035			Mg KOH/g %(w/w)			Oximation/ RCH-AL 83
Platinum-Cobalt-Color			5				DIN EN 1557/ DIN ISO 6271/ ASTM D 1209
Sulphuric acid test		20			Pt/Co scale			British Standard 4583; 1991, paragraph 10
Physical Properties

Isopropyl Alcohol Test Description

Specification Limits Min. Max.				Unit of Measure			Test Method
Iso Propanol		99.8		%(w/w)			DIN 55685
Water		0.1		%(w/w)			ASTM D1364
Acidity as acetic acid		0.001		%(w/w)			ASTM D1613
Water Miscibilty			Miscible
Nonvolatile Residue			0.001			g/100ml
Appearance	Clear & Free from suspended Matter
Colour, Pt-Co			5			ASTM D1209
Density @ 20oC		0.785		0.786			g/ml
Distillation, IBP		81.8		oC			ASTM D1078
Distillation, DP		82.8		oC			ASTM D1078
Refractive Index @ 20oC		1.376		1.378			ASTM D1218

Butyl Acrylate Monomer Test Description	Specification Limits Min. Max.				Unit of Measure			Test Method
Butyl Acrylate			99.5			%(w/w)
Water			0.05			%(w/w)
Acidity			0.005			%(w/w)
Specific Gravity 20/4oC			0.896			0.901
Colour, APHA				10
Inhibitor (MEHQ)		10		20			ppm

 

Ethyl acrylate Test Description	Specification Limits Min. Max.				Unit of Measure			Test Method
Ethyl acrylate			99.5			%(w/w)
Water			0.05			%(w/w)
Acidity			0.005			%(w/w)
Specific Gravity 20/4oC			0.920			0.924
Colour, APHA				10
Inhibitor (MEHQ)		10		20			ppm

 

Vinyl Acetate Monomer Test Description	Specification Limits Min. Max.				Unit of Measure			Test Method
Vinyl Acetate Monomer			99.9			%(w/w)
Water			400			ppm
Acidity			50			ppm
Acetaldehyde			100			ppm
Methyl Acetate			50			ppm
Ethyl Acetate			150			ppm
Specific Gravity 20/20oC			0.932			0.936
Colour, APHA				5
Distillation Range		71.0		73.5			oC
Hydroquinone		14		16			ppm

 

Methyl Methacrylate Test Description	Specification Limits Min. Max.		Unit of Measure		Test Method
Color		≤ 5		APHA
Purity		≥ 99.8		Wt%
Initial Boiling Point		≥96.0		°C
Water Content		≤ 0.05		wt%
Specific Gravity		0.942-0.946		20/4°C
Free Acid		≤0.005		Wt%
Distillate Amount		≥ 95.0		Wt %
Inhibitor(Toponal-A)		25+/- 5		PPM

 

Butyl Glycol Test Description	Specification Limits Min. Max.				Unit of Measure			Test Method
Butyl Glycol			99.0			%(w/w)
Water		0.10		%(w/w)			ASTM E-203
Acidity as Acetic acid		0.01		%(w/w)			ASTM D-1613
Colour, PTCO			10			ASTM D-1209
Specific Gravity		0.9005		0.9040			ASTM D-4052
Appearance, P/F	Clear, Clean Liquid								ASTM D-2090

 

Ethyl Glycol Test Description	Specification Limits Min. Max.				Unit of Measure			Test Method
Appearance				Clear Colourless liquid
Colour		10		-			APHA
Acidity ,as CH3COOH			0.01			%
Specific Gravity @ 20deg.C		0.929		0.934			Kg/l
Distillation range		132		138			Deg
Moisture			0.2			%
Purity			99			%

 

 

Hydrogen Peroxide-50 %

 

 

Test Description Specification Unit of Measure

 

 

CONCENTRATION 50.00

%

 

 

STABILITY 0.30 ml/min

ACIDITY (AS H2SO4) 0.015 - 0.03 g/100 ml

RESIDUE ON EVAPORATION 0.2 g/100 ml

RESIDUE ON IGNITION 0.05 g/100 ml

IRON (AS FE) 0.0001 g/100 ml

COPPER (AS CU) 0.00001 g/100 ml 

Zinc Oxide

Test Description Specification Unit of Measure

ZINC OXIDE (ON DRY

BASIS)

99.8000 % min

MOISTURE (110 DEG. CELS.) 0.1000 % max

LEAD (PB) 0.0020 % max

RESIDUE ON 325 MESH 0.0050 % max

APPEARANCE White/faint yellowish

colour powder , free from

grit & foreign material.

Diethylene Glycol
Test DescriptionSpecification Limits
Min. Max. Unitof Measure TestMethodDiethylene Glycol 99.5 %(w/w)Water 0.1 %(w/w)0
Acidity (as acetic acid)0.005 %(w/w)
Iron 0.5 ppm
Ash 0.005 %(w/w)
Appearance Clear Visual
Specific Gravity 20/20oC 1.117 1.119
Distillation Range at 760 mm Hg 242 250 oC
LEAD (AS PB) 10 ppm 

Monoethylene Glycol		99.5		%(w/w)
Water		0.05		%(w/w)
Acidity (as acetic acid)		0.001		%(w/w)
Iron		0.1		ppm
DEG		.05		%(w/w)
Aldehyde (as acetaldehyde Chloride)		10		ppm
Ash		0.001		%(w/w)
pH at 20oC		6.5		7.5
Appearance		Clear		Visual
Specific Gravity 20/20oC		1.1153		1.1156

^{Triethylene Glycol Test Description}

^{Specification Limits Min. Max. Unit of Measure Test Method}

^{Triethylene Glycol 99.0 %(w/w)}

^{Water 0.1 %(w/w)}

^{DEG 0.5 %(w/w)}

^{Heavy Ends 0.5 %(w/w)}

^{Ash 0.01 %(w/w)}

^{Appearance Clear Visual}

^{Specific Gravity 20/20oC 1.124 1.126}

^{Distillation Range at 760 mm Hg 280 295 oC}

^{Colour 25 APHA}

 

Dipropylene GlycolDipropylene GlycolDipropylene Glycol

Ethyl Acetate Test Description

Specification Limits Min. Max.			Unit of Measure		Test Method
Ester content as Ethyl Acetate			99.8		%(w/w)
Water			0.05		%(w/w)
Acidity (as acetic acid)			0.01		%(w/w)
Residue on evaporation			0.01		%(w/w)
Appearance		Clear, colourless
Odour			Characteristic
Solubility	Freely soluble in alcohol and acetone
Relative density 27/27oC			0.895		0.898
Distillation Range at 760 mm Hg
IBP			76		oC
DP			78.5		oC

 

 

 

n-Propyl Acetate		99.5		%(w/w)			Gas Chromatography
Water		0.10		%(w/w)			ASTM D1364
Acidity (as Acetic acid)		0.01		%(w/w)			ASTM D 1613
Colour		10		Pt-Co			ASTM D 1209
Specific Gravity 20/20oC			0.885			0.890
Non Volatile Matter		0.005		g/100ml			ASTM D1353
Distillation range at 760 mm Hg
Boiling Point			100			oC
Dry Point			112			oC

Solvent Naptha 100 Test Description	Typical Values		Unit of Measure		Test Method
TYPICAL VALUES
Aromatics Cotent		99		ASTM D1319
Distillation Range
IBP	156		oC		ASTM D86
DP	173		oC		ASTM D86
Flash Point (Abel)	44		oC		IP170
Density @ 15 oC	0.875		Kg/l		ASTM D4052/1298
Conductivity@ 23oC	450		pS/m		ASTM D2624
Composition
Paraffins		1		%(w/w)
Napthenes		0		%(w/w)
Aromatics		99		%(w/w)

 

Solvent Naptha 150 Test Description

Typical Values Unit of Measure Test Method

TYPICAL VALUES

Aromatics Cotent 99 ASTM D1319

Distillation Range

IBP 184 oC ASTM D86

DP 217 oC ASTM D86

Flash Point (Abel) 65 oC IP170

Density @ 15 oC 0.887 Kg/l ASTM D4052/1298

Conductivity@ 23oC 450 pS/m ASTM D2624

Composition

Paraffins 1 %(w/w)

Napthenes 0 %(w/w)

Aromatics 99 %(w/w)

 

Toluene Test Description

Specification Limits Min. Max.				Unit of Measure			Test Method
Appearance			Not listed			Visual
Purity		Not reported		Vol.%			Visual
Saybolt Color			+30			ASTM D 156
Desnsity at 15 deg.C		0.847		Kg/dm3			ASTM D 4052
Distillation Range IBP 50% DP		110 110.6 111.80		Deg.C			ASTM D 850
Flash Point		7		Deg.C			ASTM D 56
Anilie Point		Not- listed		Deg.C			ASTM D 611
Copper Corrosion 3 hours at 50 deg.c			1a			ASTM D 130
Sulphur Content		Free		ppm/wt			ASTM D 853
Aromatics		99		Vol.%			ASTM D 1319
Hydrogen Sulphide		Ppm/wt		ppm/wt			ASTM D 853

 

Xylene Test Description	Specification Limits Min. Max.				Unit of Measure			Test Method
Appearance			Not listed			Visual
Purity as aromatic		99.9		Vol. %			ASTM D 1319
Saybolt Colour			+30			ASTM D 156
Density at 15deg.C			Kg/dm3			ASTM D 4052
Distillation Range IBP 50% DP		137.8 139.6 142.6		Deg.C			ASTM D 850
Flash Point		27.5		Deg.C			ASTM D 56
Aniline Point		Not listed		Deg.C			ASTM D 611
Copper Corrosion 3 hrs at 50 deg.c			1a			ASTM D 130
Sulphur Content		free		ppm/wt			ASTM D 853
Aromatics		99.9		Vol.%			ASTM D 1319
Hydrogen Sulphide		free		ppm/wt			ASTM D 853

 

 Talc PowderTest Description Specification Unit of MeasureCALCIUM 5.6 %MAGNESIUM 27.4 %SILICA 58.2 %LOSS ON IGNITION 0.6 %IRON 2.5 %ALUMINA CONTENT 0.8 % 

 Sodium Hexametaphosphate  Test Description Specification Limit Unit of Measure  TOTAL PHOSPHATE(AS P2O5) 68.0 %   INACTIVE PHOSPHATE(AS P2O5) 7.5 %   WATER-INSOLUBLE MATTER 0.06 %   HEAVY METALS (AS Pb) 0.001 %   ARSENIDE (AS As) 0.0003 %   FLUORIDE (AS F) 0.003 %   PH VALUE 5.8-6.5 %  

 sodium tripolyphosphate  test description specification limit unit of measure  na5p3o10 95. 0 % p2o5 57. 0 % water insoluble 0. 05 %f 0. 003 %as 0. 00013 %heavy metals (pb) 0. 001 %chloride (cl) 0. 025 %sulphate (so4) 0. 4 % whiteness 85 %ph(1% aqueous solution) 9. 5-10. 0 % 

 TRI CRESYL PHOSPHATE  Test Description Specification Limit Unit of Measure  SPECIFIC GRAVITY 1.185 % COLOUR HAZEN 350 max.   MELTING POINT < -40 %   BOILING POINT 240 - 255 C SOLUBILITY IN WATER Insoluble   VAPOUR DENSITY 12.7   FLASH POINT > 225 C

Tri cresyl phosphate  test description specification limit unit of measure  specific gravity 1. 185 % colour hazen 350 max.   melting point < -40 %   boiling point 240 - 255 c solubility in water insoluble   vapour density 12. 7   flash point > 225 c as ) 0. 0003 % 

 Tri Sodium Phosphate  Test Description Specification Unit of Measure  P2O5 17.7 % CARBONATES 0 . 8 % INSOLUBLE 0 . 2 % SOLUBLE IRON COMPOUNDSAS (FE)  0.0009  

 Mono Sodium Phosphate  Test Description Specification Unit of Measure  CONTENT ( BASE ONNAH2PO4 )  98 % P2O5 CONTENT 58 % PH VALUE ( 1% AQUEOUSSOLUTION )4.2-4.8 %WATER INSOLUBLEMATTERS  0.1 % LOSS ON DRYING 2.0 %SULFATE ( BASE ON SO4 ) 0.05 %CHLORIDE ( BASE ON CL ) 0.014 %FLUORIDE ( BASE ON F ) 0.005 %HEAVY METAL ( BASE ONPB )  0.001 % ARSENIC ( BASE ON AS ) 0.0003 %  

 Beta Blue  Test Description Specification Unit of Measure  OIL ABSORPTION 45+1BULK DENSITY 0.30+0.02 gms/ccSPECIFIC GRAVITY 1.50 - 1.54SOLUBILITY IN WATER Maximum 1 % %RESIDUE ON 300 MESUSIVE NilMOISTURE CONTENT 1 % Maximum %PH OF 10% AQ. SLURRY 7.0 - 8.0DISPERSIBILITY ExcellentHEAT STABILITY Stable up to 260 °c : As perApplication

 Pigment Alpha Blue  Test Description Specification Unit of Measure  MOLECULE WEIGHT 576OIL ABSORPTION 40+2   BULK DENSITY 0.32+0.02 gms/cc   SPECIFIC GRAVITY 1.5 - 1.6 % SOLUBILITY IN WATER Maximum 1 %RESIDUE ON 300 MESUSIVE NilMOISTURE CONTENT 1 % Maximum %PH OF 10% AQ. SLURRY 7.0 - 8.0HEAT STABILITY Stable up to 260 °c  

 Titanium dioxide rutile  Test Description Specification Unit of Measure  INDEX TIO2 90 %WHITE DEGREE (CONTRASTTO THE STANDARD SAMPLE)97 %TINT REDUCING POWER(CONTRAST TO THESTANDARD SAMPLE)100 %VOLATILE CONTENT (105AFTER 23, 24H)0.5 %WATER SOLUBLE MATTER. 0.5 %OIL ABSORPTION 21PH OF AQUEOUSSUSPENSION6.5-8.0RESISTIVITY IN WATEREXTRACTION30RESIDUE ON SIEVE 450.01 %  

 titanium dioxide anatase  test description specification unit of measure  index tio2 50-98 %whiteness (contrast tothe standard sample)99 %tint reducing power(contrast to thestandard sample)100 %volatile content (105after 23, 24h)0. 5 %water soluble matter 0. 5 %oil absorption (gram per100g)23ph of aqueoussuspension6. 5-8. 0resistivity in waterextraction30residue on sieve 45(%) 0. 01 %    

 Chrome Oxide Green  Test Description Specification Limit Unit of Measure  PURITY 99.00 %   WATER SOLUTION 0.40 %   RESIDUE ON 325 MESH 0.30 %   MOISTURE 0.30 

-heptanetest description specification unit of measureassay,heptanes 99. 9 %assay,normal heptanes 99. 0 %assay,other isomers 1. 0 gms/ccboiling range 92. 3-99. 9 cspecific gravity@15. 56c 0. 68-0. 695 ? Idity as acetic acid 0. 002 %residue afterevaporation10 ppmsulfer 0. 001 %water 0. 005 %

Poly Aluminium Chloride Test Description Specification Limit Unit of Measure ALUMINUM OXIDE (AL2O3 ) 30 % WATER-INSOLUBLE 0.3 % PH1% WATER SOLUTION © 3.5-5.0 % NA 0. 01 % AS 0. 0002 % PB 0. 001 % CD 0. 0002 % HG 0. 00001 %

N-Methyl Pyrrolidone Test Description

Specification Limits Min. Max.		Unit of Measure		Test Method
Purity		99.80		Wt%
Color		50		APHA
Water		300		wt ppm
Total Amines		100		ppm

 

Phthalic Anhydride Test Description

Specification Limits Min. Max.				Unit of Measure			Test Method
Purity			99.8 %			IS 5158 A-5
Molten Color			20			ASTM D-3366
After Heating Color			50			ASTM D-3366
Acidity			0.1%			%wt
Ash Content		0.1%		%wt			IS 5158 A-6
Solidification Point		130.8		Deg.C			ASTM D-1493
Appearance			White crystalline			Observation

Tetrahydrofuran Test Description

Specification Limits Min. Max.				Unit of Measure		Test Method
Source Tank				Report
Miscellanous Text				Report
Lot Number				Report
Tetrahydrofuran assay		99.90		Wt%		ACC11014
Color		10		APHA Color		ACC11017
Water		300		Weight ppm		ACC11015
Peroxide		50		ppm		ACC11026
Total Impurities		500		ppm		ACC11014
Inhibitor	250		350		ppm		ACC11014

 

Maleic Anhydride Test Description	Specification Limits Min. Max.					Unit of Measure			Test Method
Appearance					Molten Briquettes
Colour		20		APHA				ASTM D-3366-74
Purity		99.5		Wt %				JIS K-0114
Heat Stability			40				ASTM D-3364
Solidification Point		52.5		Deg.C				JIS K-0065
Ash Content		20		ppm				JIS K-0067
Iron Content		5		ppm				JIS K-0121
Maleic Acid		0.3		Wt %				JIS K-0124
Acid Value		1140		1155				Mg KOH / g

 

Pentaerythritol – 95 % Min Test Description	Specification Limits Min. Max.			Unit of Measure		Test Method
Appearance			White Crystalline powder
Colour			0.8
Monopentaerythritol		95			Wt %
Hydroxyl		17.5			%
Ash		0.1			%
Moisture		0.5			%
Melting Point		195			Deg.C

 

Acrylamide(Crystal)

Test Description Specification Unit of Measure

ACRYLAMIDE 98.0

gm/cc

MOISTURE 0.8-1.5

%

COLOR ( 20% SOLUTION ) 10

%

FE 10 ppm

CONDUCTIVITY ( 40%

SOLUTION )

20 Ms/cm

.

PH 6-8

%

 

 

 

Sorbitol

 

 

Test Description Specification Unit of Measure

 

 

WATER 1.5 % max

REDUCING SUGARS 0.3 % max

RESIDUE ON IGNITION 0.1 % max

PH 10% (W/W SOL) 3.5-7.0 % max

SULPHATED ASH 0.1 % max

NICKEL 1.0 ug/g max

 

 

 

Carboxy methyl Cellulose

 

 

Test Description Specification Limit Unit of Measure

 

 

NA 6.5-8.5

%

 

 

VISCOSITY 4500

%

 

 

PH 6.0-8.5

%

 

 

CHLORIDE 1.8

%

 

 

MOISTURE 4.5-5.5

%

 

 

FE

0. 03 %

 

 

HEAVE METAL (PB)

0. 002 %

 

 

AS

0. 0002 %

 

 

 

 

 

Formaldehyde

 

 

Test Description Specification Unit of Measure

 

 

GRAMS / LITER 1.05 TO 1.12

%

 

 

DENSITY, GRAM PER 8.75 TO 9.33

%

 

 

MILLILITER 96 TO 99 C

C

 

 

POUND PER GALLON 61 TO 85 C AT 65C

POLYMER

 

 

 

 

 

BOILING POINT FORMS

 

 

 

 

Aerosil 200

 

 

Test Description Specification Unit of Measure

 

 

SPECIFIC SURFACE AREA

(BET)

200 (175-225) m

2/g

TAPPED DENSITY 5 0 g/liter

LOSS ON DRYING < 2.5 wt%

LOSS ON IGNITION < 2 . 0 w t%

PH 3.5 - 5.5

SIO

2 CONTENT 99.0 - 100.5 wt%

 

 

Vaccum Salt

 

 

Test Description Specification Unit of Measure

 

 

ASSAY AS NACL 99 %

CALCIUM 25.0 mg/kg

MAGNESIUM 1.0 mg/kg

SODIUM SULPHATE 0.10 %

SODIUM CARBONATE 0.005 %

IRON 6.5 mg/kg

COPPER 0.5 mg/kg

ANTICAKE 15.0 mg/kg

MOISTURE 0.05 %

 

Filter Aid Powder

 

 

Test Description Specification Unit of Measure

 

 

SI02 85.42 %

AL203 2.79 %

FE203 1.79 %

LOSS O IGN 1.97 %

OTHER 8.03 %

 

 

 

Hydrazne Hydrate

 

 

Test Description Specification Unit of Measure

 

 

ASSY 80 %

SP.GR. 1.032 %

BOW.PT. 119.4 C

 

Soyabean Oil

 

 

Test Description Specification Unit of Measure

 

 

FFA % (AS OLEIC ACID) 0.10 %

COLOR IN 1" CELL 3.00

MOISTURE & VOLATILE

MATTER

0.10 %

IODINE VALUE 121-140 %

PER OXIDE VALUE MG./KG. 2.00 Mg./Kg

R.I.@40 O C 1.4650-1.4710

SAP VALUE 189-195

 

 

Bisphenol

 

 

Test Description Specification Unit of Measure

 

 

PURITY 99.85 %

WATER 0.1 %

PHENOL 100 max mg/kg

ISOMERS 1000 max mg/kg

BTX 400 max mg/kg

IRON 1 max mg/kg

MOLTEN COLOR 20 max pt/co scale

ASH 5 max mg/kg

 

 

HydroChloric Acid

 

 

Test Description Specification Unit of Measure

 

 

ASSAY

30 %

 

 

COLOR

(APHA) 10

 

 

RESIDUE AFTER IGNITION

0 . 0 0 0 5 %

 

 

BROMIDE

0 . 0 0 5 %

 

 

SULFATE

0.0001 %

 

 

SULFITE

0.0001 %

 

 

FREE CHLORINE

0 .0001 %

 

 

AMMONIUM

0.000001 %

 

 

ARSENIC

0.000001 %

Benzoic Acid

Test Description Specification Unit of Measure

 

 

VAPOR DENSITY 4.21 (vs air)

VAPOR PRESSURE 10 mmHg ( 132 °C)

AUTOIGNITION TEMP. 1061 °F °F

BP 249 °C(lit.) °C

MP 121-125 °C(lit.) °C

SUITABILITY meets USP testing

 

 

 

Tartaric Acid

 

 

Test Description Specification Unit of Measure

 

 

VAPOR DENSITY 5.18 (vs air)

GRADE puriss

ASSAY. 99.7-100.5% %

FORM powder

OPTICAL ACTIVITY

[

]20/D +12.0 to +12.8°, c

= 20% in H

2O

°C

AUTOIGNITION TEMP. 797 °F °F

QUALITY meets analytical

specification of Ph. Eur., BP,

NF, FCC, E334

TOTAL IMPURITIES organic volatile impurities,

complies (GC)

residual solvents, complies

 

 

 

0.001% heavy metals (as

Pb)

IGN. RESIDUE 0.05% (as SO

4) %

LOSS 0.2% loss on drying, 105 °C %

MP 168-170 °C

170-172 °C(lit.)

°C

ANION TRACES chloride (Cl

-): 100 mg/kg

oxalate (C

2O4

2-

): in

 

 

Acetic Acid

 

 

Test Description Specification Limit Unit of Measure

 

 

GLACIAL ACETIC ACID 99.0

%

 

 

AS 0.0001

%

 

 

FREEZING POINT 14.5 C

EVAPORATES THE RESIDUAL) 0. 01

%

 

 

THE HEAVY METAL (AS PB

COUNTS)

0. 0002

%

 

 

Citric Acid Monohydrate

 

 

Test Description Specification Limit Unit of Measure

 

 

CONTENT /ASSAY 99.5 % Min %

HUMIDITY /MOISTURE 9 % Max %

BARIUM Conforming with test

CALCIUM 200 PPM Max PPM

CHLORIDE 50 PPM Max PPM

IRON 10 PPM Max PPM

SULPHATE 20 PPM Max PPM

OXALATES 50 PPM Max PPM

HEAVY METALS , AS PB 5 PPM Max PPM

LEAD o.5 PPM Max PPM

ARSENIC 1 PPM Max PPM

SULPHATE ASH 0.05 PPM Max PPM

 

 

READILY CARBONISABLE

SUBSTANCES

 

 

Conforming with test

ORGANIC VOLATILE

IMPURITIES

Conforming with test

UV ABSORBANCE Conforming with test

MERCURY Nil

 

 

 

Hydrofluoric Acid

 

 

Test Description Specification Unit of Measure

 

 

PHYSICAL STATE Clear, colorless, corrosive fuming

liquid

MELTING POINT -84

C

 

 

BOILING POINT

. 19.5 C

 

 

SPECIFIC GRAVITY 0.97

pH VAPOR DENSITY 2.21

NFPA RATINGS Health: 4 ; Flammability: 0;

Reactivity: 1

FLASH POINT not flammable

STABILITY Stable under ordinary conditions

 

Formic Acid

 

 

Test Description Specification Limit Unit of Measure

 

 

CONTENT 99.3,99.0, 98.0, 97.0, 95.0%

 

 

CHLORIDE(CL-) 0.05, 0.05, 0.10, 0.20,%

 

 

SULPHATE (SO) 0.10, 0.15, 0.30, 0.40, 0.60%

 

 

IRON(FE) 0.12, 0.35, 0.70, 0.90, 2.0%

 

 

RESIDUE 0.002, 0.002, 0.010, 0.040%