Shradanand Building, Mumbai, Maharashtra
Send E-mail
Send SMS
Home»Products»

Sweeteners And Polyols

We have a wide range of sweeteners and polyols that are used in various food products. These products are safe to use, and adds a very good flavor to the food.

REQUEST CALLBACK
Approx. Rs 10,000 / order
Get Best Quote

Phthalonitrile

Cas No.: 91-51-6

Molecular Formula : C8H4N2

Appearance :  Yellowish Fine Crystaline Powder

Mol. wt.: 128.13 gms/mole

Melting Point 137Dc- 139Dc

Moisture by KF : NMT 0.5%

Assay by Titration : NLT 98%

Assay by HPLC :  NLT 98%

Stability : Stable. 

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / order
Get Best Quote
Product NameDTPA Potassium
Chemical NameDTPA Potassium Hydroxide, DTPA K 5
CAS Nos.7216-95-7
Color & Physical FormSlightly Yellowish Liquid
Assay40 % ( +/-1
pH (1 wt % solution)11 - 12
Chelation value80 mg CaCo3 / g

Application : It is used in Electroplating, synthetic, paper industry, rubber, photography, printing inks.

Packing : 25 kg / 50 kg / 250 kg drum
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
EDTA Calcium EDTA is a widely-used abbreviation for the chemical compound ethylene diamine tetraacetic acid (and many other names, see table). EDTA refers to the chelating agent with the formula (HO2CCH2)2NCH2CH2N(CH2CO2H)2. This amino acid is widely used to sequester di- and trivalent metal ions. EDTA binds to metals via four carboxylate and two amine groups. EDTA forms especially strong complexes with Mn(II), Cu(II), Fe(III), and Co(III).[1]
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Epichloro Hydrine
PURITY (BY WT. MINIMUM) (%) 99
SPECIFIC GRAVITY (20/20 ºC) 1.180 ~ 1.185
WATER (BY WT. MAXIMUM) (%) 0.05
COLOR (PLATINUM-COBALT, MAXIMUM) 15
MOLECULAR FORMULA C3H5OCL
MOLECULAR WEIGHT 92.53
SPECIFIC GRAVITY (20/4oC in air) 1.18066
FREEZING POINT -57.2oC
BOILING POINT (760 mmHg) 116.11 ºC
dt/dp 0.044v/mmHg (at B.P)
COEFFICIENT OF EXPANSION 0.00104/oC (at 20oC)
LATENT HEAT OF VAPORIZATION 97.92 cal/gr (at B.P)
HEAT OF COMBUSTION 4,524 cal/gr
IGNITION POINT 415.6oC
FLASH POINT 40.5oC (Tag Open Cup)
30.2oC (Tag Closed Cup)
SPECIFIC CONDUCTANCE 34 x 10-9 ohms-1 cm-1 (at 25oC)
DIELECTRIC CONSTANT (60cm) 20.8 (at 21.5oC)
VISCOSITY (cps) 0 (ºC)
                     25
1.56 oC
1.03
REFRACTIVE INDEX (D tD) 0 (ºC)
                                 25
1.4381 oC
1.4358
WATER SOLUBILITY (20oC) Water in EP 1.47 wt%
EP in water 6.58 wt%
SOLUBILITY (20oC) Solubility in acetone, benzene,methanol, ethyl ether,haptane,and carbon tetrachloride at 25oC....Complete
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Epichlorohydrin

Physical Appearance Clear Colourless liquid
Specific Gravity 1.179 - 1.182
Colour (Hazen Scale) 15 Alpha Max
Refractive Index (25 Deg.C) 1.434 - 1.436
Purity (wt. %) 99.5 min.
Moisture (wt. %) 0.1 max.
Iron ppm 0.2 max

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Ethanamidic acid amides are divided into subclasses according to the number of substituents on nitrogen. The primary amide is formed from by replacement of the carboxylic hydroxyl group by the nh2, amino group. An example is acetamide (acetic acid + amide). Amide is obtained by reaction of an acid chloride, acid anhydride, or ester with an amine. Amides are named with adding '-ic acid' or '-oic acid' from the name of the parent carboxylic acid and replacing it with the suffix 'amide'. Amide can be formed from ammonia (nh3).

Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Ethanimidic Acid Amide is a group of organic chemicals with the general formula RCO-NH2 in which a carbon atom is attached to oxygen in double bond and also attached to an hydroxyl group, where 'R' groups range from hydrogen to various linear and ring structures or a compound with a metal replacing hydrogen in ammonia such as sodium amide, NaNH2.

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Ethoxylated Nonyl Phenol AF9-9
Appearance at 25 oc transparent oily liquid with colour range from colrless to light-yellow transparent oily colorless liquid

Colour,platinum-cobalt scale mg pt+0. 5 mg co/1000 cm3,max.

150 30
Cloud point of water solution with concentration of noionic surfactants of 10g/dm3,oc 54+_3 54
Hydrogen ions concentration (ph)in water solution with concentration of 10 g / dm 3 of nonionic surfactants 7. 0+_1. 0 6. 9
Water content,%,max. 0. 5 00
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / order
Get Best Quote
Ethyl caproate
CAS NO.: 123-66-0
Mol. Formula : C8H16O2
Mol. Wt.: 144.21
Appearance : Colorless liquid
Purity : >99%
Application : Used for food additives
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / order
Get Best Quote

Ethyl Cyano Acetate

Cas No.: 105-56-6

Molecular Formula : C5H7NO2

Molecular Weight : 113.11

Melting Point : -22 DegreeC

Boiling Point : 208-210  DegreeC(lit.)

Flash Point : >230  DegreeF

Appearance : Clear Liquid
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Fibre Drum
These are developed from best quality Plywood, CRS Metal, adhesives and boards. The quality of the finished Fibre Drum is duly maintained each stage of production process. Our Fibre Drums are used in pharmaceutical, Bulk Drug, Menthol, Pesticides, Automobile Dyes & Chemical industries for powder & Semi liquid.
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Glacial Acetic Acid (99.8%)
Classification Carboxylic Acid
CAS No. 64197

Purity 99.7 %
Description
Glacial Acetic Acid (99.8%)
1)High quality

2)Reasonable price

3)On time delivery 


Specifications Assay (Min/Max) : 99.7 %Solubility in water : completely miscible Colour APHA MAX : 10Crystallizing Point : +16.1 DegreeC Chloride content (max) : 1 ppm Formic acid % by mass (max) : 0.15 %Acetaldehyde % by mass (max) : 0.10 %Oxidisable Impurities : To Pass the Test
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Gluconic Acid
appearance light yellow transparent liquid
chloride <0. 3%
arsenic <0. 001%
PB <0. 001%
reducing sugar (% <1
iron <0. 1%
heavy metals <0. 2%
sulphate <0. 2%
assay (glucono acid) 50. 63%
packing 250 kgs/drum
cas no. 526-95-4
Uses of gluconic acid:
gluconic acid is used in removing calcareous.
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Glutaraldehyde
assay 24-26%
color not more than 20 apha
packing 220 kgs/drum
cas no. 111-30-8
Uses of glutaraldehyde :
glutaraldehyde is used in agricultural chemicals, pesticide products, disinfectants (nonagricultural), furniture polish and cleaners, laundry starch preparations, leather industry in tanning process.
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / order
Get Best Quote
                     Glutaraldehyde
assay 24-26%
color not more than 20 apha
packing 220 kgs/drum
cas no. 111-30-8

Uses of glutaraldehyde : 
Glutaraldehyde is used in agricultural chemicals, pesticide products, disinfectants (nonagricultural), furniture polish and cleaners, laundry starch preparations, leather industry in tanning process.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Glycerine Pure

Physical Appearance Clear Colourless Syrupy liquid, free from foreign matter
Odour Odourless
Colour in 51/4" (Y+R) units 1.0
Fatty acids & Esters max (ml of 0.2 NH2SO4) 2.4
Chlorides (As Cl) ppm max 10.0
Sulphates (As SO4) ppm max 10.0
AgNO3 Test Pass
Dynamite/special reduction Not applicable
Acidity (ml of 0.1 N NaOH) max 0.3
Alkanity (ml of 0.1 HCl) max 0.05
Foam test MI max 5.0
% Sulphated ash max 0.01
% Glycerol content by mass min. 98.0
Sulphuric Acid test Not applicable
% Nitrogen content max. Not applicable
% Ether soluble matter max Not applicable
Refractive Index @ 20 Deg.C 1.47071 - 1.47399
% Water (W/W) max. Not applicable
Heavy Metals (As Pb) ppm max Not applicable
Iron (As Fe) ppm max Not applicable

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Glyoxylic Acid 50%

 
TEST STANDARD
1. Colour Pale Yellow To Yellow
2. Sp. Gravity 1.30 To 1.45
3. Assay (By Tr) 49 % Min
4. Assay (By Hplc) 49 % Min
5. Acidity 5% W/W Max
6. % Of Glyoxal 3% W/W Max
7. % Of Oxalic Acid
    (By Hplc)
3% W/W Max
Cas No : 298-12-4
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Lithium Bromide Anhydrous
CAS Number 7550-35-8
Appearance White Powder
Assay Min. 99.00
Moisture Max. 1.00
Use Reconstitution of brines, swelling agent for proteins, a humectant and fungicide in medicinals, electrolyte component in lithium batteries. In organic reactions, as a catalyst and dehydrohalogenating agent and in O-demethylation.
Storage No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be sure that it is not necessary to strain to reach material, and that shelves are not overloaded.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Magnesium Acetate Tetrahydrate

Cas No. :  1664-78-5

Grade   :  ACS

Formula : CH3COO)2Mg.4H2O  
 
Formula Wt. :  214.45

Description White deliquescent solid.
Assay min. 98.-102%
Insoluble matter  max.0.005%
Chloride (Cl)       max.0.001%
Sulphate (SO4)   max.0.005%
Iron (Fe)             max.0.0005%
Heavy Metals ( as Pb)  max.0.0005%
Calcium (Ca)      max.0.01%
Manganese( Mn) max.0.001%
Potassium (K)    max.0.005%
Sodium(Na)        max.0.005%
Strontium(Sr)    max.0.005%
Barium(Ba)       max.0.001% 
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Magnesium Chromate
CAS 13423-61-5 Boiling Point DegreeC 211.5
Density G/Cm3 1.695 Crystal Structure Rhomb

 
Catalog No. Product Description Purity % Particle Size Cost Per Pound
MG-401 magnesium chromate powder, yellow to red 99.8 n/a 1-2, 3-10, 11-25, 26-100 inquire

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote

Manganese Salt

We offer a wide assortment of manganese salt that is pure in composition and pH value. Non-toxic and stable under various conditions, our range of manganese salt is used across diverse range of industries. Our range of manganese salt includes manganese acetate, manganese carbonate, manganese acetate salt and manganese carbonate salt.

Manganese Acetate 

 

Manganese acetate used widely as catalyst in production of synthetic fibers, component of dyestuff, pigment, paint drier and fertilizer, we offer qualitative and accurately formulated manganese acetate.

These are available in the following technical specifications:
  • Powder, F.W. 245.08,
  • M.P. 80 0C,
  • Specific Gravity 1.59 gm/cm3
  • Item No. Description Purity Lot Size
  • AC25-95 Manganese (II) Acetate Mn >22%
  • Sulfate < 0.02%
  • Chloride < 0.01%
  • Molecular formula:s Mn(CH3COO)2 4H2O
  • CAS number: 6156-78-1
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote

Sorbic Acid
Item Index Result
appearance white powder,without impurity white powder,without impurity
ph value 7. 5-9. 5 8. 57
purity>= 99. 80% 99. 80
water <= 0. 1% 0. 03
ash<= 0. 03% 0. 03
clarity<= 2- 15
color<= 20 10

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Specifications:
Molecular Weight 126.12 g/mole
Molecular Formula C3-H6-N6
Physical state and appearance White crystalline or powder
Molecular Weight 126.12 g/mole
Color White.
Flash point Closed Cup: Higher than 93.3 DegreeC
Melting Point <250 DegreeC (482 DegreeF)
Specific Gravity 1.573 (Water = 1)
Vapor Density 4.34 (Air = 1)
Dispersion Properties See solubility in water
Solubility Partially soluble in cold water.
Insoluble in diethyl ether.
Content (sublimation) 99.8% min
Moisture 0.1 % max
PH 7.5 - 9.5
Ash content 0.03% max
Color (Pt-Co) degree 20 max
Kaolin turbidity degree 20 max

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
N- Butyraldehyde
appearance, clear clean liquid -
color, pt-co max 10
acidity as butyric acid, wt% max 0. 50
water, wt% max 0. 3
n-butyraldehyde, wt% min. 99. 0
isobutyraldehyde, wt% max 0. 3
specific gravity 20/20 c min. 0. 807
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Para Toluene Sulfonic Acid (Monohydrate)

SPECIFICATION

Appearance

White Crystaliine

Content (As C7h6o3s.H2o,%)

98 Min

Free Acid (As H2so4, %)

0.5 % Max

Water Content (%)

2 Max

Fe (PPM)

30 PPM MAX

Cas No :

6192-52-5

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Paraformaldehyde 92 Percent
appearance white solid
purity wt% 91. 94
solution state in aq ammonia transparent
formic acid wt% < 0. 02
insoluble in alkali wt% <0. 03
iron wt% <0. 001
chloride wt% <0. 001
sulfate wt% <0. 001
heavy metal wt% <0. 001
evaporation residue wt% <0. 005
ph 5. 5+/-1. 5
h2so4 test within limit
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Penta borate
Even though boric acid adds hydroxide to form B(OH)4-, you may find for pKa values and other calculations, the fictitious ions are easier to use. Thus for a typical polyprotic acid, the deprotonation series dihydrogen borate [H2BO3-;], hydrogen borate [HBO32-] and borate [BO33-] may be written as pH increases.

Boric acid can be used to form many polymeric ions. The tetraborate ion, B4O72-, is very common; the hydrogen tetraborate ion, HB4O7-, as well as triborate and pentaborate, are also seen. The various metaborate ions have an empirical formula of BO2-, and form metaborate compounds. Formation of these complicated, potentially infinite network structures is extensive, perhaps surpassed only by the silicates.

Common borate salts include sodium metaborate, NaBO2, and sodium tetraborate, Na2B4O7. The latter also occurs naturally as the hydrous mineral borax, Na2B4O7·10H2O. Boron, California contains large borax deposits and is used extensively for borate mining. The Atacama Desert in Chile also contains mineable borate concentrations.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Phenyl benzeneseleno sulphonate selenium (pronounced /səˈli Niəm) is a chemical element with the atomic number 34, represented by the chemical symbol se. It is a nonmetal, chemically related to sulfur and tellurium, and rarely occurs in its elemental state in nature
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Phenyl selenyl bromide selenium is found in economic quantities in sulfide ores such as pyrite, partially replacing the sulfur in the ore matrix. Minerals that are selenide or selenate compounds are also known, but all are rare.

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Phosphorous Trichloride
Test Results
Formula PCI3
Molecular Wt. 137.35
Specific Gr. 1.57 gm/ml
Appearance Colourless to Yellow clear liquid
Distillation Range 90% between 74.5 Degree - 79 DegreeC
Solubility In organic solvents - Benzene, ether-Carbon disulphide Carbon Tetra Chloride.
When exposed to atmospheric moisture. Yellow mass appears which does not effect the potency or reactivity.
Melting Point (-) 118.80 DegreeC
Boiling 76 DegreeC
Vapour Density 1.58 grm/ml
Density At 20 DegreeC (gms/ml) 1.58 gms/ml
MAC 3 mgm/gm3
Critical Temp 285.5 DegreeC
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Phosphorus Pentachloride - PCl5

CAS No.     : 10026-13-8

MF               : PCl5

EINECS No.  :  233-060-3

Grade Standard : Industrial Grade, Other

Purity     :       High

Appearance :     Colourless crystals

Molecular formula : PCl5

Molar mass  :  208.24 g/mol

Appearance  : colourless crystals

Density  :  2.1 g/cm3

Melting point  :  166.8 DegreeC, 440.0 K, 332.2 DegreeF

Boiling point   : 160.5 DegreeC, 434 K, 321 DegreeF (sublimation)

Solubility in water   :   decomposition (exothermic)

Solubility   :   soluble in CS2,chlorocarbons, benzene
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Product Details:
Color White Crystal
Form of ChemicalsSolid
FunctionsCatalysts
Grade StandardAnalytical Grade
Packaging TypeBag
Physical StateCrystals
SolubilityInsoluble in water
State of MatterCrystals
UsageIndustrial
We are available with phosphotungstic acid AR that are soluble in water and bears a molecular weight of 2898.07. We regularly upgrade all the machines and process equipment for easy and correct formulation of the chemicals and offering the best range ever that breathes in quality and purity. 

Specifications:   
  • Name: Phosphotungstic acid hydrate
  • Synonyms: Phosphotungstic acid hydrate; Dodeca Phosphotungstic acid hydrate
  • Molecular Formula: H3PO4.12(WO3).H2O
  • Molecular Weight: 2898.07
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Polyphosphoric acid is a colorless, hygroscopic, viscous liquid. It is used a dehydrating agent, catalytic and sequestering agent.

Characteristics Specifications

Physical Appearance

Clear Viscous liquid ( highly hygroscopic)

CAS Reg. No.

8017-16-1

Assay

116% Min

P2O5

84%

Iron Content

10ppm Max

Arsenic Content

30ppm Max

Solubility Freely soluble in water with evaluation of heat.

Application:
  • Used as a condensation and dehydrating agent in organic synthesis
  • Used in the manufacture of catalysts
  • Used in the manufacture of pigments
  • Strengths and or fortified weak phosphoric solutions

 

Packaging:

  • Domestic: 40/50Kgs HDPE carboys
  • UN Number: 1805
  • IMCO Class: 9
  • CAS Number: 7664-38-2
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Polyphosphoric acid is a colorless, hygroscopic, viscous liquid. It is used a dehydrating agent, catalytic and sequestering agent.

Characteristics Specifications

Physical Appearance

Clear Viscous liquid ( highly hygroscopic)

CAS Reg. No.

8017-16-1

Assay

116% Min

P2O5

84%

Iron Content

10ppm Max

Arsenic Content

30ppm Max

Solubility Freely soluble in water with evaluation of heat.

Application:
  • Used as a condensation and dehydrating agent in organic synthesis
  • Used in the manufacture of catalysts
  • Used in the manufacture of pigments
  • Strengths and or fortified weak phosphoric solutions


Packaging:

  • Domestic: 40/50Kgs HDPE carboys
  • UN Number: 1805
  • IMCO Class: 9
  • CAS Number: 7664-38-2


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Potassium Borate Inhalation: Causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath. Volatile hydrides are particularly dangerous because of their ease of entry into the body and their ability to destroy red blood cells. Inhalation may result in symptoms and problems similar to ingestion.
Ingestion: Boron compounds can cause nausea, vomiting, diarrhea, muscular spasms, dullness, lethargy, circulatory depression, central nervous system depression, shock, kidney damage, coma, and death.
Skin Contact: Causes irritation to skin. Symptoms include redness, itching, and pain. May cause burns to skin tissue upon contact.
Eye Contact: Causes irritation, redness, and pain. May cause burns.

Chronic Exposure: Prolonged or repeated ingestion or skin absorption of boron compounds may cause anorexia, weight loss, vomiting, mild diarrhea, skin rash, convulsions, and anemia.

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 10,000 / Order
Get Best Quote
Potassium bromide Potassium bromide is a typical ionic salt which is fully dissociated and near pH 7 in aqueous solution. It serves as a source of bromide ions- this reaction is important for the manufacture of silver bromide for photographic film: KBr(aq) + AgNO3(aq) potassium fluoride, potassium fluoborate, tin fluoborate, copper fluoborate, potassium bi fluoride, ammonium silico fluoride, potassium silico fluoride AgBr(s) + KNO3(aq)

Aqueous bromide Br- will also form complexes when reacted with some metal halides such as copper(II) bromide: 2 KBr(aq) + CuBr2(aq) potassium fluoride, potassium fluoborate, tin fluoborate, copper fluoborate, potassium bi fluoride, ammonium silico fluoride, potassium silico fluoride K2[CuBr4](aq)
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 5,000 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity50 Kilogram
Form of ChemicalsSolid
FunctionsCatalysts
Grade StandardIndustrial Grade
Packaging TypeBag
Physical StatePowder
ProcessReduction Catalyst
SolubilityInsoluble in water
(R)-6-Hydroxy-N-Boc-1-aminoindane
tert-butyl [(1R)-6-hydroxy-2,3-dihydro-1H-inden-1-yl]carbamate
cas no 169105-01-5

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Bhiwandi
  • Production Capacity: As per buyer requirement
  • Delivery Time: 4-5 days
  • Packaging Details: In Bag
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 1,000 / Order
Get Best Quote
Product Details:
Minimum Order Quantity50 Order
BrandA. B. Enterprises
Form of ChemicalsLiquid
Grade StandardIndustrial Grade
Molecular FormulaC7H15NO
Packaging Size25KG
Packaging TypeDrum

Poly(4-hydroxy-2,2,6,6-tetramethyl-1-piperidine ethanol-alt-1,4-butanedioic acid)

Other Details:

  • CAS NO.: 65447-77-0
  • Molecular Formula: C7H15NO
  • Molecular Weight: 129.2
  • Mp ->350 °C(lit.)
  • Fp: 428 °F
  • Solubility in H2O: 1.6 ppm at 20 °C
  • Water Solubility 1.6 ppm at 20 ºC
  • Melting point:>350 °C(lit.)
  • Flashpoint:428 °F
  • Solubility in H2O: 1.6 ppm at 20 °C
  • Water Solubility 1.6 ppm at 20 ºC

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: Bhiwandi
  • Delivery Time: 7-8 days
  • Packaging Details: In Carboy
Yes! I am Interested
REQUEST CALLBACK
  • 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl) Phenol
  • 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl) Phenol
Approx. Rs 10,000 / Order
Get Best Quote
Product Details:
CAS Number70321-86-7
Molecular FormulaC30H29N3O
Molecular Weight447.57 g/mol
Melting Point139-143 Deg C
FormPowder
Water SolubilityInsoluble
2-[2'-Hydroxy-3',5'-di(1,1-dimethylbenzyl) phenyl]2 H - benzotriazole.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 10,000 / Number
Get Best Quote
Product Details:
CAS Number90367-28-5
SynonymsEthanol, 2,2'-iminobis-, N-(hydrogenated tallow alkyl) derivs.
Purity95%
We offer Alkyl (c14-c18) bis (2-hydroxyethyl) amine, saturated to clients.
Yes! I am Interested
REQUEST CALLBACK
  • Fuchsin Acid
  • Fuchsin Acid
Approx. Rs 1,000 / Order
Get Best Quote
Product Details:
Minimum Order Quantity50 Order
CAS Number569-61-9
ColorGreen to Dark Green
Form of ChemicalsPowder or Crystals
Molecular Weight (g per mol)323.82 g/mol
Size25kg
AppearanceGreen to Dark Green

We are engaged in offering to our clients.
Acid fuchsin

  • Infrared spectrum Conforms to Structure
  • Wavelength 543 - 549 nm
  • c = 0.003g/l; 50% Ethanol
  • Extinction Coefficient > 85000 _
  • Wavelength 287 - 291 nm
  • Extinction Coefficient > 17000 _
  • Wavelength 235 - 239 nm
  • Extinction Coefficient > 11000 _
  • Biological Stain Commision Pass
  • Dye Content > 88 %

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: Bhiwandi
  • Delivery Time: 7-8 days
  • Packaging Details: in Bag packing
Yes! I am Interested
X
 

Download Brochure
Explore more products
Borofluoric Acid
Get Best Quote
PVC Solvent Cement
Get Best Quote
B-Naphthaldehyde
Get Best Quote
Methylene Chloride
Get Best Quote
Barium Nitrate
Get Best Quote
A. B. Enterprises

Manoharlal Bang(Partner)
No. 202, Shradanand Building 272/274, Samuel Street
Mumbai - 400003
Maharashtra, India
Send Email
© A. B. Enterprises. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited